#5302 - ARMADILLO SPOTTED BELLY STOCKMAN - 4-1/8"

SKU:
$432.00
$432.00
Unavailable
per item

4-1/2 INCHES CLOSED

1095 HC STEEL HARDENED TO 56+/- 1 ROCKWELL

MASTER / SPEY / SHEEPSFOOT BLADES

CUSTOM ARMADILLO HANDLES

VERY LIMITED SUPPLY

MADE IN THE USA

Only 1 left!

YOU MAY ALSO LIKE:

BARBWIRE GRIP

$37.00
The Barbwire Grip is sold nation-wide and has a long tradition as the best tool available for holding barbed wire, smooth wire, and small cable when it is being stretched. Simply slip the wire into the self locking collar, and stretch with a come-along, power-pull or any other stretching device. Wire will not slip no matter how hard you pull, actually the harder you pull, the tighter the wire grip grips. The heavy durability and simplicity of design make this item an all time best seller.
​
Shop

NET WIRE TIE BAR

$29.00

Tie bar is used to easily tie pre-cut wire clips onto fence posts.  Smaller version of tie bar, designed for use with net wire.  Fits between standard net wire squares.

 Moore Maker Patent
 3-1/2 inch model for use with Net Wire
 Simplify your fencing.
Shop

SPIKE SADDLE PLIER 8 INCH

$93.00
These pliers have a spike on one side and a bullnose on the other. They are available in either large or small versions. This is the smaller saddle plier version. These are among the best fencing pliers in the world. As always they come with Moore Maker Quality you can trust. 

 Heavy steel construction, new black handles
 Hammer head, and wire cutter on both sides
 Staple puller in the head, plus NEW Spiked head
 Specifically designed for cutting heavy barbed wire.
 You will not find a better set of fencing pliers!
Shop

STAVE PLIER - 8 INCH

$93.00
These pliers were designed to be carried by the working cowboy. The Saddle pliers are available with a custom built scabbard that can be attached to a saddle, 4-wheeler, or belt. Moore Maker has patented this design, and these pliers are built to last. All Moore Maker tools carry a one year guarantee, but are made to last a lifetime. 

 No "staple puller" holes in the head to insure grip.
 Specially designed for tying wire stays.
 Hammer head and wire cutter on both sides
 Length: 8 inches
 Wire will not slip through this plier.
Shop

TEE-POST TIE BAR

$35.00
Tie bar used to tie wire clips onto Tee- Posts. Simply insert end of clip into open end and twist bar around the post. Spiked end for untying clips from posts. 

 7" model for barbed or single strand wire
 Moore Maker Pantented
 Cuts wire tying time in half
 Smaller version available for net wire applications.
Shop

BULLNOSE FENCING PLIER - 10-1/4 INCH

$109.00

The Bullnose fencing pliers are the most reliable fencing pliers on the market. Moore Maker INC. has designed these pliers to cut barbed wire, and smooth wire with ease. These are the type of fencing pliers used on most of the major ranches in the world. These pliers are guaranteed for 1 year, but they are designed to last a lifetime.


 Heavy steel construction

 Hammer head, and wire cutter on both sides

 Staple puller in the head

 Specifically designed for cutting heavy barbed wire.

 You will not find a better set of fencing pliers!
Shop

SPIKE FENCING PLIER 10-1/4 INCH

$111.00
These new pliers have a spike on one side and a bullnose on the other. They are available in either large or small versions. This is the large version. These are among the best fencing pliers in the world. 

 Heavy steel construction
 Hammer head, and wire cutter on both sides
 Staple puller in the head, plus NEW Spiked head
 Specifically designed for cutting heavy barbed wire.
 You will not find a better set of fencing pliers!
Shop

Diagonal Cutter 8" - MM-338

$45.00
Constructed from C1080 carbon steel. Made in the U.S.A. Moore Maker logo and model number laser engraved into steel. Yellow comfort grip insulated handles. Heavy duty construction. Moore Maker warantee. 

 8 inch Diagonal Cutter
 Model MM-338
 High Carbon C1080 steel hardened cutting surfaces
 Laser Engraved with model numbers and Moore Maker logo
 Available individually or as a set
Shop

MM85 - Fencing Tool 10"

$55.00
Constructed from C1080 carbon steel. Made in the U.S.A. Moore Maker logo and model number laser engraved into steel. Heavy duty construction. Moore Maker warantee.

 10 inch Fencing Tool
 Model MM-85
 Multiple tools in one (wire cutter/grip, staple puller / hammer)
 Laser Engraved with model numbers and Moore Maker logo
 Available individually or as a set
Shop

Linemans Plier 9" - MM-369

$54.00

Constructed from C1080 carbon steel. Made in the U.S.A. Moore Maker logo and model number laser engraved into steel. Yellow comfort grip insulated handles. Heavy duty construction. Moore Maker warantee. 

 9 inch Linemans Plier
 Model MM-369
 High Carbon C1080 steel hardened cutting surfaces
 Laser Engraved with model numbers and Moore Maker logo
 Available individually or as a set


​
Shop

Long Nose Plier 7" - MM-317

$43.00
Constructed from C1080 carbon steel. Made in the U.S.A. Moore Maker logo and model number laser engraved into steel. Yellow comfort grip insulated handles. Heavy duty construction. Moore Maker warantee. 

Blue.gif 7 inch Long Nose Plier with cutter
Blue.gif Model MM-317
Blue.gif High Carbon C1080 steel hardened cutting surfaces
Blue.gif Laser Engraved with model numbers and Moore Maker logo
Blue.gif Available individually or as a set
Shop

Slip Joint Plier 6" - MM-526

$28.00
Constructed from C1080 carbon steel. Made in the U.S.A. Moore Maker logo and model number laser engraved into steel. Heavy duty construction. Moore Maker warantee.

 6 inch Slip Joint Plier
 Model MM-526
 High Carbon C1080 steel
 Laser Engraved with model numbers and Moore Maker logo
 Available individually or as a set
Shop
1 2